900 × 600
 

You Too Can DIY Clean Your Car Engine And Save Money


Engine cleaning is a dirty job, but somebody's got to do it! If you're sick of paying for car engine cleanings at the shop, then you can easily do it yourself at home.
 

This blog post will discuss the steps to clean your car engine safely and effectively. It's not as difficult as some might say and can save you some money, too.

Let's get started!

Wait Until the Engine Cools Down
 

Before starting your DIY engine cleaning, it's crucial to wait until the engine has cooled down. This could take a few hours, so be patient, or you'll end up burning yourself.
 

Plus, applying a degreaser on a hot engine will be useless because it will just evaporate. So let the engine cool down if you want to be safe.

Wear Protective Gear
 

Protecting yourself from potential injuries is key when cleaning anything, especially an engine.
 

The next step is to put on some protective gear. This includes safety goggles, gloves, and a mask. You don't want any of the degreaser getting in your eyes or mouth, and you don't want it on your skin.

Remove Dirt and Debris from the Engine
 

The next step is to remove all of the dirt and debris from the engine. This can be done with a brush or a vacuum cleaner. Make sure to get into all of the nooks and crannies so that the degreaser can do its job properly.

Cover Loose Cables and Fragile Parts
 

Once the engine is free of dirt and debris, it's time to cover any loose cables or fragile electronic parts. You can do this with plastic bags to prevent getting them wet from the degreaser.

Apply Degreaser
 

Now it's time to apply the degreaser. You can either use a spray bottle or pour it on the parts; just make sure it reaches all the dirty places.
 

Read the instructions that come with it to see how long you need to let it sit. After the prescribed time is over, start scrubbing. Use a toothbrush so you can reach all the tight spaces.

Wipe the Engine Dry
 

Once you've scrubbed it clean, use a paper towel to wipe it all dry. If there are any stubborn spots that won't come off, you can scrub them with the brush, but be careful not to damage anything. Now reattach any cables or parts you took off.

Apply a Protectant
 

After your engine is clean, you'll want to keep it looking nice and shiny for longer. There are a lot of different protectants on the market, so find one that's right for your car. Apply it according to the instructions, and you're good to go!
 

Now that we've explained the easy steps to DIY clean your car's engine, you should be able to take care of some engine maintenance tasks on your own. However, if the engine of your car has reached a point where you think it's better to buy a new car, you can sell your used car to us.

 

At Jackie Cooper Imports, serving Tulsa, OK, we buy used cars without wasting any time, so speak to us today!

Categories: Social

Subscribe to Our Blog